There are mechanisms in your toilet that gauge the water level in the tank and then send a signal to another mechanism to shut off the water supply when it reaches its maximum capacity. If there is an issue at any point during this process, you may have a toilet that does not cease the flow of incoming water. The outcome is a toilet that produces a bothersome sound and an increased water cost. So, what is the cause of this problem?
Locate the problem
Determine which gadget is not functioning properly. It might be either the fill valve or the flapper valve. The flapper valve is the mechanism that regulates the water flow into the bowl part of the toilet. The fill valve is responsible for controlling the quantity of water that enters the tank.
How to Inspect the Flapper Valve
Once you remove the cover of your toilet, examine the flapper valve. If it seems worn or damaged, then this is certainly the problem. You’ll have to replace this component. It is more economical than repairing it. Shut off the water and empty the bowl. Substitute the valve.
Inspect the Fill Valve
The fill valve is the component that prevents water from entering the tank. This is accomplished by utilizing a buoyancy mechanism. Ensure that this valve is free of dirt and able to move without obstruction. If this valve is jammed, discolored, impaired, or not functioning properly, then replace it using the identical techniques outlined above. Keep in mind, shutting down the water is the initial and crucial step.
Toilet Valve Seat
Occasionally, a running toilet might be caused by debris collection or mineral deposits on the flush valve seat. To fix this, drain the tank by flushing the toilet after shutting off the water supply. Ensure that the flush valve seat is thoroughly cleaned by using a sponge or cloth. In order to ensure a proper seal, it may be necessary to replace the seat if it is damaged or worn.
Check Your Installation
Once you have replaced the faulty valve and reassembled everything, it’s time to test the toilet. Activate the water flow, allow the bowl to fill, and perform a test flush. If the flushing is not strong or thorough, you can make adjustments to the Fill Valve. This will cause the tank to fill up more and thus make each flush more powerful.
Remember, a plumber in your vicinity may handle this for you. It should probably take less than an hour to complete. So, you could wish to inquire about his pricing initially. The components will not be included in his fee. He might offer a discounted rate for each job, thus saving you some money.
Summary
Being a plumber in Melbourne, FL for 20 years, I have seen it all. The worst of the worst clogs to the easiest of the easiest leak fixes. I mean the type of fix which required a simple turning of a wrench. One thing I cannot stress enough is that you do not panic. Also, the first thing you should do in a leak emergency is turn off the main water supply. Then calm down and think. Is this something you can handle? Or do you need to call a professional? Keeping a clear mind will help you deal with your plumbing emergency. And we will have them throughout our lives.
